RPH
Residential Pipe Heating Cable
- Bus wires [Nickel-plated Copper/Tinned Copper]
- Conductive Core[Heating Matrix]
- Inner Jacket[Modified Polyolefin]
- Metallic Braid[Tinned Copper]
- Outer Jacket[CR; Modified Polyolefin]
RPH self-regulating heating cable is used for metal and plastic pipe freeze protection in commercial and residential applications(not intended for use inside any pipes, for freeze protection of liquids other than water, or for use in classified hazardous locations)
Pre-assembled products are also available for quick selection and easy installation.
Specification
| Max. Intermittent Exposure Temp. (Heating device energized or de-energized) |
85℃(185℉) |
|---|---|
| Max. Maintain or Continuous Exposure Temp. | 65℃(149℉) |
| Supply Voltage | 120 VAC / 208~277 Vac |
| Output Wattage | 10, 16W/m(@0℃ on pipe) 3, 5W/m(@50℉ on pipe) |
| Bus Wire Gauge | 16AWG |
| Min. Bending Radius | 40mm(@-40℃) 1.57in.(@-40℉) |
| Min. Installation Temperature | -40℃ -40℉ |
| Protection | NEMA 4X, Type4X, IP66 |
| Outer Jacket Color | Black |
| Braid Coverage | Minimum 80% |
| Braid Electrical Resistance | Maximum 0.012Ω/m |
Documents
Datasheets
Brochures & Catalogs
Commercial & Residential Xarex Heat Tracing Cable
Xarex Self-regulating heating cable Catalog