FM
Snow Melting
- Bus wires [Nickel-plated Copper/Tinned Copper]
- Conductive Core[Heating Matrix]
- Inner Jacket[Modified Polyolefin]
- Metallic Braid[Tinned Copper]
- Outer Jacket[CR; Modified Polyolefin]
The FM self-regulating heating cables can be used for melting snow on any territories such as walkways, driveways and loading docks.
Nonetheless, it is configured for easy installation. In concrete, asphalt or under paving stone, our proven snow melting solution will perform reliably for a long duration.
Highly efficient, it will automatically keep the area clear of snow and ice 24 hours and 7 days.
Specification
| Max. Intermittent Exposure Temp. (Heating device energized or de-energized) |
100℃(212℉) |
|---|---|
| Max. Maintain or Continuous Exposure Temp. | 85℃(185℉) |
| Supply Voltage | 208~277 Vac |
| Output Wattage | 60, 80W/m(@0℃ Embedded in Concrete) |
| Bus Wire Gauge | 14AWG |
| Min. Bending Radius | 40mm(@-40℃) 1.57in.(@-40℉) |
| Min. Installation Temperature | -40℃ -40℉ |
| Protection | NEMA 4X, Type4X, IP66 |
| Outer Jacket Color | Orange |
| Braid Coverage | Minimum 80% |
| Braid Electrical Resistance | Maximum 0.012Ω/m |
Documents
Datasheets
Brochures & Catalogs
Commercial & Residential Xarex Heat Tracing Cable
Xarex Self-regulating Heating Cable Catalog